AnyRidge Surgical Kit: Full Type Easier and safer to drill for the depth as you need with the stopper drills.
[Surgical Kit Components] Lance Drill • Useful to make an indentation on cortical bone to confirm the exact drilling location. Advisable to go into the bone to the full length of a fixture.
Marking Drill • Each drill has calibrations from 7.0 to 18.0mm (TANSDF4815, TANSDF5415, TANSDF5915 have calibrations up to 15.0mm) • Easy to recognize by dual marking systems. (Groove and laser marking)
- Stopper Drill
- Point Trephine Bur
- Trephine Bur
• Minimizes the drilling steps needed, especially for wider fixtures. • Helpful for collection autogenous bone. • Useful for removing failed and fractured fixtures. • Depth markings are 7, 8.5, 10, 11.5, 13mm, same depths as fixtures. (No Y dimension so markings are actual length) • Markings on the drill shaft represent the inside / outside diameter of Trephine Burs.
Cortical Drill • Removes cortical bone and enlarges socket, especially in hard bone. • Similar function with Countersink of other systems. • Each drill has two steps of diameter for convenience.
Handpiece Connector • Delivers torque for the placement of a fixture with a handpiece. • Easy and secure pick-up and delivery. • Used to place an implant without amount. • Marks on the shaft can indicate the position of the fixture platform, especially in flapless surgery.
Ratchet Connector • Delivers torque for the placement or removal of a fixture with a Ratchet Wrench.
• Secure a Ratchet Extension or Torque Wrench to a fixture before exerting force.
• Too much torque force can result in damage to hex of a fixture. • Marks on the shaft can indicate the position of the fixture platform, especially for flapless surgery.
Hand Driver (1.2 Hex) • Used for all Cover Screws, all Abutment Screws, and all Healing Abutment. • Available in 4 lengths for added convenience. • Hand Driver can be directly inserted into the Torque Wrench without using an adapter.
• Hex tip can withstand 35-45Ncm of Torque without distorting.
Abutment Removal Driver • Used to remove final abutment; use after removing Abutment Screw. • Insert straight into the abutment and rotate clockwise. • Long Abutment Removal Driver is to disconnect an abutment with a cemented crown.
Drill Extension • Extends drills & other handpiece tools. • No more than 35Ncm torque: Can be distorted when too much force is applied.
Direction Indicator • Confirms drilling direction and location during drilling. • To check the drilling position.
Path Finder • After placing a fixture, a Path Finder can be connected to check pre-placed
the fixture is parallel. • Gingival depth can be measured with the grooves, especially for flapless surgeries.
Torque Wrench & Adapter • Torque Wrench has torque options from 15Ncm to 45Ncm and is used for final tightening of the Abutment Screw into the fixture.
Sign up for our newsletter
Sign up for our mailing list to receive new product alerts, special offers, and coupon codes.