High efficiency heat dissipation technology
Apply heat dissipation technology on the top of the moto and equipped with a large cooler fan, it has greatly increased the excellent thermal efficiency and the life and stability of the motor.
Complete drainage of moisture condensate
Condensed water is completely discharged under differential pressure by using the centrifugal separation principle. (Easy filter replacement and additional 0.01 micro mist separator can be installed according to customer request)
Heat dissipation mold design
INJE's excellent heat dissipation effect and design for safety.
Compressor heat dissipation technology Applying heat dissipation technology on the top of the motor and equipped with a large cooler fan, the life and stability of the motor have been greatly increased with excellent thermal efficiency.
Safety designAutomatic stop when the temperature rises over a certain level using a thermo stat, it can be operated safely by automatically restarting after the automatic stop and then lowering to the appropriate temperature.
Thermal oxidation treatmentThe compressor has improved stability through fire protection coating to prevent fire and thermal deformation caused by high heat.

Moisture and bacteria remove technology : IJCA-DRY
INJE propietary technology removes condensate and bacteria at the same time.
Centrifugation water removalClean air while rotating the air compressed by the motor at high speed. Separation and removal of air, moisture and bacteria.
Differential pressure automatic discharge method Water and bacteria separated from compressed air are completely discharged by differential pressure.
Filtration filter5㎛ of air through the installation of an additional internal filter ( 0.01㎛ ) Filtering of dust, bacteria and foreign matter is possible.

Name of Each Part/Exterior Dimensions


Specifications
Motor : IJ750G x 2Unit
Compressed fluid : air
Compressed method : Oil free Reciprocating
Cooling method : Air cooled (cooling fan operating )
Operation control : Multi stage control Automatic start-stop
Suction requirements : Atmospheric pressure , 2~38℃
Recommended pressure : 0.6 ~ 0.8 MPa (Max 1.0 MPa)
Discharge air volume (60Hz) : 280 L/min (1.0 MPa 80 L/min)
Motor rotation speed (60Hz) : 1740 RPM
Connection diameter : Hose, 10mm
Tank Volume : 40 L
Recommended usage : 0.8 MPa 100 L/min
Evacuation of condensed water :
Cooling centrifuge type (automatic discharge of extra
pressure)
*Discharge the condensed water in the tank manually with
external valve.
Compressed air class : AirFilter element 5㎛ filtration equip
Noise level : 67 dB
Dimensions : 585(W) X 400(D) X 650(H)
Output power : 1600w (220V 7.3A(60Hz))
Electric source : Single-phase AC 220V 50/60Hz